Gold Member Since 2017
Audited Supplier
Linqu Dongxing Industrial Co., Ltd.

Sealant, Silicone Sealant, Adhesive manufacturer / supplier in China, offering Neutral Silicone Sealant for Aluminum Doors, Treadle Pump for Africa Irrigation, Belt Conveyor and so on.

(/ )

Supplier Homepage Product Glue Neutral Silicone Sealant for Aluminum Doors

Neutral Silicone Sealant for Aluminum Doors

FOB Price: US $1.3-1.5 / Piece
Min. Order: 500 Pieces
Min. Order FOB Price
500 Pieces US $1.3-1.5/ Piece
Get Latest Price
Production Capacity: 50000ctns/Month
Transport Package: Carton
Payment Terms: L/C, T/T
Basic Info
  • Model NO.: DZ-S112
  • Morphology: Water Emulsion
  • Material: Silicone
  • Main Agent Composition: Natural Polymer
  • Promoter Composition: Curing Agent
  • Color: Clear
  • Specification: can be customized
  • HS Code: 3506100090
  • Bonding Function: Instant Adhesive
  • Application: Construction, Woodworking
  • Classification: Room Curing
  • Characteristic: Waterproof
  • Composition: Organic Material
  • Trademark: DZ
  • Origin: Shandong, China
Product Description
TECHNICAL DATA SHEET
 
Characteristics:
1.One component
2. Neutral Curing and non-corrosive to metal, coated glass, concrete and marble
3. Non-discoloring. 
4. Excellent adhesion to glass, metal and plastic etc
5. Excellent resistance to low and high temperature, little performance changes between -40 ºC~150 ºC
6. Excellent resistance ultraviolet radiation
7. Odorless
 
Application:
For a wide range of Aluminum doors and windows, plastic steel doors and windows, stainless steel, glass, Aluminum sheet, ceramics, sky light, roof, most of building material. Can not use for coated glass.
 
Limitations:
1.Cannot be used as structural sealant.
2.Not compatible with materials with grease or exudation.
3.The construction surface should be clean and dry.
4.Not applicable to the seal of the immersed, airtight, or comprising substrates like copper, brass and lead, and oil-exudation surfaces.
5.Cannot be used on the substrate surface below 6ºC or above 40 ºC
 
Curing Time:
Track-free Time is between 15 to 20 minutes at room temperature
Completely curing Time is between 48 hours to 96 hours at room temperature.


way of use:
1.preparation:clean,de-grease and dry the surface.protect the edges of sealing gap with masking tape;
2.cut the nozzle according to the fissure width,cut off the tube outlet over the thread and screw the nozzle on;
3.application temperature +5c to +30c;
4.extrude silicone by means of cartridge gun;
5.tool the sealant with a wet spatula before formation occurs;
6.up to 15min, remove the masking tape;
7.fresh spots can be clean with water, after hardening mechanically only
 
Notices:
1. For best result, use opened cartridges on the same day. Otherwise store it strictly tightened
2. Pre-test is necessary to ensure the excellent adhesive property.
3. Avoid contacting with skin or eyes, in case of contacted, rinse immediately with plenty of water, go to hospital if necessary
4. Keep away from children before curing.
5. Avoid contaminating food, medicine or cosmetics.
 
Color available:
White, greyblack, others of special order
 
Packaging
Cartridge: 300 ml   24 cartridges/ctn
Gross weight: 470 g     Net weight: 410 g    
 
Storage and transportation:
1. 12 months stored in a dry and ventilated place below 27ºc in original packaging.
2. non-dangerous, can be transported by train, automobile, ship.
3. Uncured product may irritate eyes. In case of eyes contact, rinse them immediately with water and seek medical aid.
4. Keep out of reach of children.



Testing Standard: GB/T 14683-2003  
NoItemThe standardTest result
1AppearanceHave no grain, no agglomerations, no skinning, and no bubble.Pass the standard
2Density (g/cm3)±0.11.438
3Droop degree
mm
Uprightness≤30
LevelNo damageNo damage
4Skinning time(h)≤30.33
5Elastic recovery ratio (%)≥8092
6Extrusion ability(ml/min) ≥80116
7Tensile modulus
 (Mpa)
23ºC≤ 0.60.7
8Cold-hot adhesiveNo damageNo damage
9Under water adhesiveNo damageNo damage
10UV radiationNo damageNo damage
11Definite ElongationNo damageNo damage
 

FAQ:

1.Can u send sample to us ?
   Yes, the sample is free.
 
2.Can you give us private design ?
   Yes, we offer OEM service, can making your own brand.
   
3.What's your guarantee?
   10-15 years.
 
4.Can you provide us with your client information ?
    Yes, for checking our company reputation and sample collection.
 
5.How many days to produce one 20'container?
   10-15days.
 
6.Can we visit factory?
   Yes, warmly welcome to visit us at any time.
 
7.What are the documents we provide ?
   Packing list, commercial invoice, CO / FORM E / FORM A , BL making    according to your demand. 
Send your message to this supplier
Avatar
Ms. lale
*From:
To: Ms. lale
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

Find Similar Products By Category